PropertiesEvents
Displays the about dialog box for the VUMeter control. Sets the background color. Color of the border. The border is the region between the
outer and inner bevels. Width of the border in pixels. Color of the dial area inside the gauge. Gauge position value that will cause a high alarm event. Color of the band on the gauge that represents high alarm
values. Color of the top and left sides of the inner and outer bevels if the bevel properties are set to "Raised" or "Solid". Color of the bottom and right sides if the bevel properties are set to "Inset". Solid (2), Inset (0), or Raised (1). The width of the inner bevel in pixels. Gauge position value that will cause a low alarm event. Color of the band on the gauge that represents low alarm
values. Maximum value. This must be greater than the minimum
value. Minimum value. This must be less than the maximum value. Color of the needle. Color of the arc between the high and low alarm regions. South(0), West(1), East(2), North(3) Solid (2), Inset (0), or Raised (1). The width of the outer bevel in pixels. Current position. This must be a value between or
including the Min and Max property values. The color of the left and top sides of the outer and inner
bevels when the bevel styles are "Inset". The color of the bottom and right
sides when the style is set to "Raised".
TickColor
TickMarks
|
Events
|