About
Displays the about dialog box for the VUGauge control.
[Back to Top]
BackColor
Sets the background color.
[Back to Top]
BorderColor
Color of the border. The border is the region between the
outer and inner bevels.
[Back to Top]
BorderWidth
Width of the border in pixels.
[Back to Top]
FaceColor
Color of the dial area inside the gauge.
[Back to Top]
HighAlarm
Gauge position value that will cause a high alarm event.
[Back to Top]
HighAlarmColor
Color of the band on the gauge that represents high alarm
values.
[Back to Top]
HiliteColor
Color of the top and left sides of the inner and outer
bevels if the bevel properties are set to "Raised" or "Solid".
Color of the bottom and right sides if the bevel properties are set to "Inset".
[Back to Top]
InnerBevel
Solid (2), Inset (0), or Raised (1).
[Back to Top]
InnerBevelWidth
The width of the inner bevel in pixels.
[Back to Top]
LowAlarm
Gauge position value that will cause a low alarm event.
[Back to Top]
LowAlarmColor
Color of the band on the gauge that represents low alarm
values.
[Back to Top]
Max
Maximum value. This must be greater than the minimum
value.
[Back to Top]
Min
Minimum value. This must be less than the maximum value.
[Back to Top]
NeedleColor
Color of the needle.
[Back to Top]
NormalColor
Color of the arc between the high and low alarm regions.
[Back to Top]
Orientation
South(0), West(1), East(2), North(3)
[Back to Top]
OuterBevel
Solid (2), Inset (0), or Raised (1).
[Back to Top]
OuterBevelWidth
The width of the outer bevel in pixels.
[Back to Top]
Pos
Current position. This must be a value between or
including the Min and Max property values.
[Back to Top]
ShadowColor
The color of the left and top sides of the outer and inner
bevels when the bevel styles are "Inset". The color of the bottom and right
sides when the style is set to "Raised".
[Back to Top]
